Newsletter
Newsletter

FPGA, motherboard, CPU and SoC

Scroll down
Herman Brule
Herman Brule
I`m
  • Residence:
    Bolivia
  • City:
    Santa cruz
  • Age:
    34

November 22, 2026

14:32

Herman BRULE

Hi,

I’m very busy working on https://openxpon.confiabits.com/ it’s ton of port for https://github.com/alphaonex86/openwrt . I have to port the ONU, the OLT, fix tons of test cases, … I have to be sure the stability is perfect, no OOM/memleak, good performance, and the universal compatibility with any other device. No one had serious OLT/ONU projects then most of GPON have to be done from 0. I had enabled lot of features of the hardware support, power managements, fixed lot of stabiliy problem, and improve greatly stuff like wifi just by passing to modern Linux kernel.

Now I have my first FPGA, then I’m more free to test more stuff. I have do some motherboard like intel 386 motherboard because I have the CPU but the motherboard I have is dead and retro hardware is very expensive. Then I have do FPGA motherboard, the FPGA in this case allow me test some funny stuff like new internal device, … combine perfectly with the open source BIOS I do the rescue partially dead retro hardware (more robust BIOS with analyze tools, benchmark, … like memtest, dump, USB boot/keyboard, lsusb/lspci, speedsys, …)

I have do too GPON sniffer tools, I’m adapting modern CPU to old SLOT 1 motherboard. Why? just to test, with embedded RAM, the motherboard RAM is just here for the DMA. The yes, with directly attached memory to CPU and motherboard as just device, the “never obsolete” logic is now more true. I’m testing too about CPU via FPGA like my own new CPU for old motherboard, another arch like RISC-V into x86 motherboard, …

Now Ultracopier have true native async via OS like io_uring under Linux, CatchChallenger is working under MS-DOS and under intel 486 with 1000+ players online.

Now I have 486 laptop with 8MB, updated with SSD and wifi 6 (I had to do this devices), and I rescue old hardware (you can send me), EG I do USB support to be easy to use and install. I do my own modern AT power supply too to be sure working on this old devices.

Posted in CatchChallenger, Hardware, ISP, Network, PCB, Technology, UltracopierTags:
All Rights Reserved.
Email: contact@herman-brule.com
Write me a message
Write me a message

    * I promise the confidentiality of your personal information